S_Anglewinder - AllinOne​ - Scale 1/32
Ref. NR3D2102471

• Inverted motor support also compatible with original Fly motors or similiar.

• High performance 3D Anglewinder replacement chassis to improve your model handling and speed in all kinds of tracks.

• Built-in S_Anglewinder short can motor mount with All-In-One flex design, allowing 2 or 4 suspension/fixing points with several setup options**.

• Rear axle with 0,75mm offset and with support for conventional bearings or ball bearings (diameter: 4.75mm).

• Compatible with NR3D front suspension system. Description with assembly instructions available for download here.

• Front axle height can be adjusted using bushings and M2 screws.

• Depending on the model / brand of motor used, it may be necessary to lightly trim the interior close to the motors's electrical contacts in order to prevent them from touching the body and limiting the movement of the rear suspension. To mount with rear suspension and maintain the rear details, it is necessary to cut out some of the exhaust/engine accessories from the original model. No additional trimming required for proper fit.

• The Fly model original interior can be replaced by lexan interior or similar. With some extra work original interior can be cut and adapted to work with this configuration.

• The front screw tower of the body should be trimmed by about 1-1.5mm to allow the chassis to be adjusted to the underside. Due to the little space available for the head of the front fixing screw, we decided to increase the front tower of the chassis by about 1-1.5mm to allow some tilting movement on the body with adjustment on the front screw.

• Only compatible with short can motors.

• Light weight and strong.

• Parts supplied: Chassis, 4x 1mm spacers, 4x spring stoppers for front suspension option and specific rear suspension top clamping bar.

** See product photos for more informations about chassis setup.​